• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

2min mod jet kit and exh sprocket

I too was and am looking for a 7 degree advance exhaust cam sprocket but they seem to be unobtainium and SISF isn't drilling anymore gears.

The 2 minute mod can be had by sending the carbs to SISF in Florida USA, but I suspect intercontinental shipping might be a significant cost issue(?)

You can probably just order the 2MM jets from SISF but you wouldn't be getting the carb spa treatment or the overflow tubes.
 
Last edited:
I asked Steve last year in July and he said he would look for shipping cost, but never got an answer. We had both surgery and other more important things to do so I asked again in April and he wrote that he isn't well and doesn't ship to Europe.
Have to do carb work because fuel level is 4 mm under on two carbs. Would be great if anyone can sell me the 2min mod who doesn't need it anymore. Don't want to pull the carbs 2 times.
So my Conny is stting since last year.
As for the sprocket I"ll slot it for 7° advance, but carbs are in first place.
 
I talked with him via email couple weeks ago.

I believe he's open for carb stuff, just not the exhaust cam advance gear.
 
SISF told me last year in July that he can't do the sprocket, because Kawasaki doesn't sale the sprocket he needs for rework.
Maybe he does carbwork but not shipping to Europe.
So anyone can sell and ship me a 2min mod jet kit?
My Connie is not really rideable and I don't want to pull the carbs 2 times.
Would also be interested in Power or torque cams
Chris
 
Top