I'm having trouble with my Audiovox CC not setting. There is 0.07 Volts on the purple wire at rest and 12+ Volts when brake pedal is pressed. However, when I ground the purple wire it shows 0.00 volts at rest but still no cc setting. I've checked the red light in the servo at the connector and it blinks when bike is started, blinks faster as rpms are increased, flashed once when set switch is pressed and once when resume switch is pressed. Could it be the circuit board in the servo is fried? I hate to replace the servo and it still not work and blow $80 in the process.
I have also pulled the cover on the keypad and lightly burnished the contact with a soft pencil eraser to no avail either. Any other pearls of wisdom from the collective wisdom of COGdom?
I have also pulled the cover on the keypad and lightly burnished the contact with a soft pencil eraser to no avail either. Any other pearls of wisdom from the collective wisdom of COGdom?