• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

C10 carb kits and fuel filter .

Cra-z1000

Cra-z1000

Member
Member
Just thought I'd share these products . Good stuff !

https://www.amazon.com/dp/B00NHVT0CS/ref=cm_sw_r_cp_awdb_t1_kg4RDbPYKPN4N


https://www.amazon.com/dp/B000CAXTWO/ref=cm_sw_r_cp_awdb_t1_Pk4RDb331JV8N

https://www.amazon.com/dp/B0040CU0HM/ref=cm_sw_r_cp_awdb_t1_zp4RDbSQY1X91

The kits were pretty decent and reasonable price .
I also replaced my fuel line with some Gates barricade fuel injection hose . It's supposed to be resistant to ethanol...we shall see .

When I bought the kits a couple weeks ago they were 11 bucks . Looks like the price went up on that link
 
that is a good price on those kits, but having done many many carbs, I prefer to use the OEM Kehien parts, in lieu of any off shoots like K&L. those used to be the common ones, but sometimes they were inconsitant in the little spring loaded pins on the float needles...
Murph caries the OEM stuff, for a slightly higher price, but I do trust the OEM parts a lot more when I buy them..
https://www.murphskits.com/product_info.php?cPath=1_94&products_id=130&osCsid=3sAQ-46dkBzOoizp-TSxa2

just tossing that out in case someone wants a link.

:great: :great: :great: :great:
 
You must log in or register to reply here.
Top