• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Center Stand refab

croach1776

croach1776

Tonto
Member
Found welder to refab my center stand in prep for shop installing lowering links. Will install Center Stand this weekend and
drop bike off at shop to have lowering links installed and front lowered also. I think shop will also adjust side stand. Hopefully will be completed in couple of weeks.
 
That seems a bit much, but may be ok.
I only removed 1" after lowering my C-14 about 1 3/4"..
While your fabricating, I suggest you weld nuts into the feet of the stand.
If too much was removed, bolts can be screwed into the nuts, to raise the stand a bit.

Ride safe, Ted
 
Last edited:
You must log in or register to reply here.
Top