Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.
I have a Ninja 250 tank in good condition if you consider one. I was going to mount on right side and it will fit nicely right against the battery box and can access easily when side panel is removed. Then you still have the tool tray intact
I have a Ninja 250 tank in good condition if you consider one. I was going to mount on right side and it will fit nicely right against the battery box and can access easily when side panel is removed. Then you still have the tool tray i
I went half naked for 2 reasons. 1. My bike was wrecked / the bottom fairings were scratched / cracked and whoever installed the tip over bars cut big round holes in the side fairing rather than fitting them thru the vents. It looked like crap. 2. The Connie was jus too hot - lotta heat...
forum.concours.org
If link doesn't work I can post pictures for ya here
Best
Bob
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.