• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Fs wedges, risers and more....

Konehead34

Member
Member
Finally found a set of helibars and i no longer need the risers, wedges and AST pullback adapter.

Murphs (phils) wedges w/washers. And longer bolt for stock and 1 1/2 riser. $45 shipped

Murphs 1 5/8 risers silver w/offset ram ball and bolts... $80 shipped

Gen mar 1 1/2 Risers silver w/bolts $60 shipped

AST pullback adapter plate.. $65 shipped

Stock handlebars from 2010 w/stock bolts..
Shocked retail over $350 asking $200 pair plus actual shipping cost
 

Attachments

  • 20201010_172543.jpg
    20201010_172543.jpg
    79.3 KB · Views: 129
  • 20201010_172522.jpg
    20201010_172522.jpg
    66.6 KB · Views: 114
  • 20201010_172650.jpg
    20201010_172650.jpg
    109.5 KB · Views: 122
  • 20201010_172507.jpg
    20201010_172507.jpg
    79.4 KB · Views: 141
  • 20201010_172500.jpg
    20201010_172500.jpg
    82.1 KB · Views: 125
Finally found a set of helibars and i no longer need the risers, wedges and AST pullback adapter.

Murphs (phils) wedges w/washers. And longer bolt for stock and 1 1/2 riser. $45 shipped

Murphs 1 5/8 risers silver w/offset ram ball and bolts... $80 shipped

Gen mar 1 1/2 Risers silver w/bolts $60 shipped

AST pullback adapter plate.. $65 shipped

Stock handlebars from 2010 w/stock bolts..
Shocked retail over $350 asking $200 pair plus actual shipping cost
How much for the handlebars/risers, {third picture 20201010 172650.jpg} including shipping
 
Last edited:
That would be for the handlebar assembly. $200 plus actual shipping costs. What zip would i.be shipping to..? So i can give u a price...
 
Can the AST pullback adapters be used in conjunction with risers?
 
Thanks, I did some research after I posted and found out they work on 2010 and newer. I have a 2008 and use my top compartment.
 
Thanks again for the wedges, they are working well for me. I combined them with some 1.75" risers and they have fixed that weird wrist angle.
 
Funny how such a little sliver of wedge can change that angle. Glad there working well for u....my neck and wrists needed more pull back to where i could sit more upright. So when the opportunity to pick up a set of helibars presented itself i jumped on it. I had a set on my c10, so i knew how good they were going to make it feel...
 
If these are still available
Murphs 1 5/8 risers silver w/offset ram ball and bolts... $80 shipped
I'll take them
 
Faseljd, i not going to post the tracking info here for ALL to see... if u want it send me a pm (private messagr with text number or email and ill send u the tracking number...
 
Top