• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Hardware kit for front tip over bars

Tour1

Guest
Guest
Are the engine bolts metric in the front tip over bar hardware kit?  I got some old Rivco bars that came with longer 3/8 bolts to allow mounting the bars but the OEM bolts were10mm metric IIRC. 
 
Morning

Sorry I don't  hang out here much..the bolts in the kits are 3/8 x 5 from memory

Murph
 
Top