In search of tip over bars for C10
YOU need one of these. Pines #1 hydraulic pipe bender or larger, plus the dies and mandrels. A mid 60s one will set you back about $4 to 5k depending on the condition, plus shipping. The dies and mandrels are usually extra.I don't think the standard foot pegs will do much. Murph at Murph's kits (is that Gary?) said that the highway pegs offer a little protection, but his lowered foot pegs are also narrower to maintain the original ground clearance. At least that is my understanding of it.
I tried bending some 1" 16ga steel tube with a hydraulic pipe bender which predictably did not work. I think I need a conduit bender...
Yeah, that looks about right but I just don't have the space for one.YOU need one of these. Pines #1 hydraulic pipe bender or larger, plus the dies and mandrels. A mid 60s one will set you back about $4 to 5k depending]
Hi Samuel,I spoke with him on the phone and he said he lost his supplier of the bent tubes. He offered to send me whatever drawings he has for the tubes and has the rest of the hardware for sale which would be harder for me to make. If I can make one set I'd imagine I could make a second, so I'll let you know if it goes anywhere. He is currently trying to dig up his drawings.
Darrell, if you send me a private message with your email I will send you the drawing.
Send me a message with your email address and I will forward you the drawing.Samuel, if you're open to it, I would very much like to have a copy of the drawing...please let me know.
thank you,
John