• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

NC, WI - The 8th Annual Big Bend, WI Wrenching Session

ManWorkingHere

Guest
Guest
On Saturday, 7/16, I rode over to the COG Wrench session at Larry's house.  Larry is a generous host!  He helped bleed my front and rear brakes, adjust clutch fluid level, and change the rear gear oil. 

Great motorcycle info shared by Steve and Bob all the while even though they came on non-Connie bikes.  Cary came down from Appleton area that morning.  I learned about DennisKirk.com and KenSports.com for motorcycle gear and parts and stuff.

I was able to help Cary perform the Fuel Gauge resistor project on his 2005 C-10.  I brought my extra resistors along to share.  He was the only other C-10 present.

Steve and I also stripped out obsolete wires from the previous owner's CD/CB player I removed earlier.

I took a few pictures of the work but not enough of the friendly attendees: Steve and Donna with son, Ian; Bob, Cary, and Larry, our host (with Sue).

Thank You!!!

Matt


https://picasaweb.google.com/manworkinghere/WrenchingSession71611?authuser=0&authkey=Gv1sRgCMbI-8KUt-vv9QE&feat=directlink
 
Top