• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

SOLD.....2006 Concours For Sale

jimbobob

Guest
Guest
$$ SOLD. $$

Up for sale, my 2006 Concours with a little over 49,000 miles. $1800. I bought the bike Oct. 2017 with 42K miles.

I have since done the following:
-Had carbs rebuilt by Shoodabeen, overflow tubes installed, and rejetted for 2 minute mod.
-Replaced both camshafts (some pitting) with a set from Steve with no pitting.
-New Performance Exhaust sprocket & retimed intake sprocket
-New Spark plugs
-Rebuilt petcock
-Replaced front wheel bearings
-All new radiator hoses
-New thermostat and o-ring
-New water pump pump seal and o-ring
-New o-rings on rear coolant log
-Free power mod
-New EBC rotors, front & rear (@ 46,000 miles)
-New EBC brake pads, front & rear
-Avon rear tire has just over 1600 miles
-Brand new Avon front tire

Things I have added:
-Manual cam chain tensioner
-45 degree metal valve stems
-Murphs bar risers
-Murphs Knee Savers (lowered pegs)
-Murphs headlight wiring harness
-Headlight cover
-Volmeter/charging port in left glove box
-Aluminum glove box knobs (deletes key locks/still have the original locks)
-Murphs block off plates
-Murphs complete black screw kit and Side cover knobs
-Battery maintainer pigtail
-K&N air filter
-KB fork brace w/tube protectors
-Ruddbow tailbrights and "KMW" stickers
-Murphs Top case rails
-Shad 46L top case w/ mounting plate and backrest
-Factory tank bra

Also with the bike:
-Murphs Valve Adjust tool
-Fairing extenders
-Antler covers
-Clymer and Factory service manuals
-Stock seat, rebuilt and recovered by previous owner
-Corbin seat w/ removable backrest (all leather)
- Russell Day Long seat, dual/rider and passenger
-Gustafsson tinted sport shield
-17.5" tall tinted shield, w/ Vetter pop out vents
-21" tall clear Cee Bailey shield that I cut down from a 26"
-25" tall clear 7Jurock shield
-26" tall lightly tinted Cee Bailey shield

Message me or text two five 2 6 seven eight thirty thirty for pics, as I have a hard time posting them here.
 
Here's Jim's C10.
 

Attachments

  • IMG_20200815_111144619.jpg
    IMG_20200815_111144619.jpg
    108.9 KB · Views: 143
  • IMG_20200815_111238877.jpg
    IMG_20200815_111238877.jpg
    105.6 KB · Views: 130
  • IMG_20200815_111207851.jpg
    IMG_20200815_111207851.jpg
    148.6 KB · Views: 126
  • IMG_20200815_083648471.jpg
    IMG_20200815_083648471.jpg
    69.5 KB · Views: 120
More pics
 

Attachments

  • IMG_20200815_083504768.jpg
    IMG_20200815_083504768.jpg
    99.2 KB · Views: 103
  • IMG_20180930_165242297.jpg
    IMG_20180930_165242297.jpg
    212.7 KB · Views: 117
  • IMG_20200815_083451257.jpg
    IMG_20200815_083451257.jpg
    96.2 KB · Views: 110
  • IMG_20200815_083604858.jpg
    IMG_20200815_083604858.jpg
    104.8 KB · Views: 106
More pics
 

Attachments

  • IMG_20200815_113036779.jpg
    IMG_20200815_113036779.jpg
    210.7 KB · Views: 115
  • IMG_20200815_113049056.jpg
    IMG_20200815_113049056.jpg
    342.1 KB · Views: 111
  • 2220202.jpg
    2220202.jpg
    69.2 KB · Views: 116
  • IMG_20180930_165242297.jpg
    IMG_20180930_165242297.jpg
    212.7 KB · Views: 110
First, I'd like to thank Paul for helping me post my photos. I think maybe I've figured out how to do it on my own now. I'm technically challenged when it comes to anything digital...

I have had a couple of inquiries and wanted to post the answers up here. 

The bike has no accidents that I know of. I have dropped it once on the right side, right after buying it. This was a non moving tipover in the shop. This was my first heavy bike. It cracked the right side panel in the area of the air scoop. I reglued with ABS cement and reinforced the area with a piece of ABS on the back side as well. The leading edge of both bags have scrapes. They were there when I bought it. I had no bags on it when I dropped it. There is one spot on the front fairing, above the headlight, where the clearcoat has chipped off. It has other small scratches/nicks in the paint as well. I have tried to highlight the worst ones.
 

Attachments

  • IMG_20200816_122544109_compress47.jpg
    IMG_20200816_122544109_compress47.jpg
    83.6 KB · Views: 117
  • IMG_20200816_122608324_compress91.jpg
    IMG_20200816_122608324_compress91.jpg
    129.1 KB · Views: 109
  • IMG_20200816_122623691_HDR_compress20.jpg
    IMG_20200816_122623691_HDR_compress20.jpg
    108.8 KB · Views: 119
Here are the leading edge of the bags
 

Attachments

  • IMG_20200816_123848977_compress81.jpg
    IMG_20200816_123848977_compress81.jpg
    67.4 KB · Views: 100
  • IMG_20200816_123825477_compress64.jpg
    IMG_20200816_123825477_compress64.jpg
    84.2 KB · Views: 100
Man that is like my 06s long lost twin brother!  :rotflmao:

I've got very similar mods, done all the same you have...and 1800 bucks! What a steal.
 
Thanks Derek! I've enjoyed it immensely. It left today with a new owner piloting it. Sad to see it go, but very happy for it's new owner.
 
I thought this would go quick.
I'll be putting up my similarly setup 2004 in a month or so but I am asking a little more.  This was priced to sell. (I hope...)
 
I priced it to move. Wanted it to go to a good home. The guy who bought it already owns a 1990 and was looking to upgrade. Good luck with your sale Oldsmoboat!
 
Top