• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

SOLD>>>>HeliBars

B

bowtie39

Member
Member
These bars are in good condition. Suppose if you want show quality a refinish is in order. I do think the adapter mounts are not original Heli's but was not an issue for operation. 180.00 shipped lower 48. Thanks
 

Attachments

  • IMG_2382.JPG
    IMG_2382.JPG
    152.4 KB · Views: 160
  • IMG_2383.JPG
    IMG_2383.JPG
    140.3 KB · Views: 161
  • IMG_2384.JPG
    IMG_2384.JPG
    52.4 KB · Views: 165
As in demand as these always seem to be and damn near impossible to find I am shocked that they haven't sold yet .
 
Yes. This setup retains the OEM cables etc. Only thing to remember is while the cables are disconnected at the bars is to re-route them(push pull carb cables) to the right side of steering stem. These bikes come with them on the left. That will free up enough slack to make them work
 
Bowtie is correct... u may find it neccessary to crack the brake and clutch connections at there reservoirs and rotate them for a more direct route..
 
You must log in or register to reply here.
Top