mattchewn has again graciously allowed the use of his shop for a COG Tech Day.
He has a fully equipped shop with a welder and plasma cutter. He have a KDS 3 here as well if you need to do some FOB or TPMS programming. He will have a new No-Mar changer installed before the tech day also if you want to mount and balance your own tires.
You can arrive as early as 8am. Lunch will be served around noon.
Please RSVP to Bamm Bamm (ebonyzg1400@gmail.com) by Saturday, May 2, 2020, to reserve your spot. We also would like to get a head count of how many mouths to feed. Even if you're not wrenching on your bike, swing by and meet up with fellow COG members.
There is a Cycle Gear about ten miles away in case you want you need to get some oil or other parts to service your bike. There is also an Advance Auto Parts about two miles away.
RSVP/Event Link: http://www.cog-online.org/clubportal/EventDetailPublic2.cfm?clubID=1328&EventID=260056
He has a fully equipped shop with a welder and plasma cutter. He have a KDS 3 here as well if you need to do some FOB or TPMS programming. He will have a new No-Mar changer installed before the tech day also if you want to mount and balance your own tires.
You can arrive as early as 8am. Lunch will be served around noon.
Please RSVP to Bamm Bamm (ebonyzg1400@gmail.com) by Saturday, May 2, 2020, to reserve your spot. We also would like to get a head count of how many mouths to feed. Even if you're not wrenching on your bike, swing by and meet up with fellow COG members.
There is a Cycle Gear about ten miles away in case you want you need to get some oil or other parts to service your bike. There is also an Advance Auto Parts about two miles away.
RSVP/Event Link: http://www.cog-online.org/clubportal/EventDetailPublic2.cfm?clubID=1328&EventID=260056
