• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

WTB Right Footpeg and Mounting Plate

Hydroman

Member
Member
Wanting to buy right front footpeg and the plate that it mounts to.

I recently acquired a wrecked C10. Trying to get it back going again. Any help would be appreciated.
 
I was not aware of the ones on Murphskits. I appreciate the the info. I may end up having to go that route if I can't find a used one. This is not a low mileage bike, so I am trying not to put too much into it. Hopefully someone might have an old used one lying around.

I have a C14, but my son took an interest in this 1000, so we are trying to get it fixed up for him.
 
You should also grind the 'cams' off the pegs themselves. It will help prevent future cracking / breaking in the event of a tipover.

 
Ebay; {These are increasing hard to find used....}


Ride safe, Ted
 
Last edited:
Thanks for the advice on the cams.

Thanks for the ebay links. I searched ebay for the front one and was not able to find a used one.
I found the rear one on ebay last night and ordered it. The rear ones seem to be plentiful.
 
Top