My method will be better / easier / cheaper. Read up on my thread about getting the torque back for a delkevic header. Since you're running duals, I think you're going to need to reduce each output to maybe 1.375" . Trust me.Just returned from an Arkansas ride and couldn't be happier with this exhaust system.
But (being me) I have an idea I want to try and thought this old discussion might show ya'll that I'm crazy e'nuff to give it a try.
I want to install a valve that will allow me to "restrict" the exhaust system at low RPM's.
(I already have the valve)
But, I need an old aftermarket Mid pipe to do it..
Does anyone have an Area P or Delkevic Mid Pipe that they'll part with?
I don't care if it's damaged as I plan to cut it up and modify it.. <mad scientist grin>
See; https://forum.concours.org/index.php?threads/used-aftermarket-mid-pipe-wanted.53559/
Ride safe, Ted
PS: Since I did my build, Delkevic and Black Widow have developed Headers that would be a lot easier to install.
I want a valve to... one that can bypass my muffler so when the straight pipe Harley guys come by I can turn up the volume.Just returned from an Arkansas ride and couldn't be happier with this exhaust system.
But (being me) I have an idea I want to try and thought this old discussion might show ya'll that I'm crazy e'nuff to give it a try.
I want to install a valve that will allow me to "restrict" the exhaust system at low RPM's.
(I already have the valve)
But, I need an old aftermarket Mid pipe to do it..
Does anyone have an Area P or Delkevic Mid Pipe that they'll part with?
I don't care if it's damaged as I plan to cut it up and modify it.. <mad scientist grin>
See; https://forum.concours.org/index.php?threads/used-aftermarket-mid-pipe-wanted.53559/
Ride safe, Ted
PS: Since I did my build, Delkevic and Black Widow have developed Headers that would be a lot easier to install.
I already bought (I think) a 2012 ZX-14R Header and took the measurements.Ted Here is the 2020 ZX14R header, I have read on a few places 2017 went to a three way cat , header collector and each muffler I’m going to grab this header and let you know what I find