• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

ABS Brake Fluid Change & Bleed

I

ibdave

Bicycle
Is there anything special compared to the C10 that you need to do to change brake fluid in ABS and linked systems? If you just put a vacuum on the bleeder at the caliper and add fluid at the resevoir will it change the fluid and not damage anything? Dave A ship in the harbor is safe, but that is not what it was built for.
 
Dave, I would think bleeding the system would be the same unless it has a separate tank for the ABS unit but it's unlikely. Bleed and flush with a vac bleeder should be fine but I would check the service manual before you dive in. CT AAD COG #7011-A 2003 Concours-Mary Ann 1995 Honda Nighthawk 750 wifes
2404055870098914013eWgtrD_th.jpg
2032479400098914013vMhfsR_th.jpg
 
Dave Fred H's video has a good section on the bleed and other C14 tasks.But you described it about right
 
You must log in or register to reply here.
Top