Well I should have known better, but i tried to do the repair myself using this link: http://www.ldrider.ca/techpages/clutchrodseal.htm Of course I knocked the seal into the engine. So I need help from the tech GURUS out there as to what do I do next, what do I need to pull apart to find this seal? I have both manul;as and will start looking through to see if there is any hope at this point. Thanks EDit to add: I got real lucky and bought a megnetic pickup tool at the local Sears Essentials. Opened the oil filler cap,extend the tool down behind the site glass. Slowly pull up and lady luck is on my side; I have the old seal. MAybe I should play the lottery tonight.
-
WOULD YOU LIKE TO BE ABLE TO POST? REGISTER FOR COG MEMBERSHIP
All registration must be done through the club's main webpage: To register / join COG, click here
For instructions to convert to full membership, click here
-
Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
Clutch rod seal replacement
- Thread starter bxrbob
- Start date
Well done Bob!! Maybe you should be a surgeon... or a fisherman, with those steady hands and fishing ability. Good resourcefulness... Glad it worked out for you. I think one of the best feelings, is when you're expecting a huge hassle of a project, and then something works out, and it's incredibly easy.
