• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

help identifying extra parts on 2015 I just purchased

H

hammerash

Member
Member
I just got my bike home last week and the guy had a box with parts that he gave me. Bunch of plastic rivets and fairing bolt still in bags, throttle lock and extra bar end weight. So the bike has Canyon Cages front and rear, 2" bar risers, Phil's rack, Cee Bailey windscreen, helmet locks, custom seat, battery tender lead, front fender extender. I list these so you know what has been taken apart. Valves have not been done.

there are lot of bolts. one, not pictures, is a long 12mm bolt removed when front canyon cages installed.

see pics coming shortly in separate post. the one picture shows 2 - 6mmx25mm bolts, 5- 8mmx25mm, 2-12mmx40mm with washers. The 8mm I am pretty sure are the orginal handlebar bolts. Should be 6 so 1 missing. Don't know what the 6mm or 12mm are for?

the other pictures show 2 washers with oval center and notches in the sides. along with 4 bolts. These were all in bag together. 2 of the bolts are the same 8mmx20mm. one is also 8mmx20mm but has slightly different head. The last is 8mmx55mm

There is another bag which I figured out are rear footpeg parts removed for the canyon cages. some springs are missing as well as one steel ball and washers, listed on partzilla as being 12x26x2.3. So don't appear to be the washers above?
 
Here are pics
 

Attachments

  • 20230424_151846.jpg
    20230424_151846.jpg
    96.7 KB · Views: 55
  • 20230424_204714.jpg
    20230424_204714.jpg
    130 KB · Views: 51
  • 20230424_151810.jpg
    20230424_151810.jpg
    76.3 KB · Views: 49
There is a screw in a bag. 92154-0209. It looks like body panel screw. I looked it up and it is. it is 5mmx16mm. I thought the 12mm may be where cages mount to engine, but those are 10mmx45mm bolts. I guess just going to have these here with no idea where they are from. He had several bikes recently including a Goldwing and an adventure tour but can't remember which right now. Could even be from one of those?
 
You must log in or register to reply here.
Top