• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Input - C14 clutch replacement

red fox

red fox

Member
Member
I finally intend to replace the clutch on my 2011 C14 with ~77k miles. Clutch was damaged by this operator's simple error in mounting aftermarket item and then riding it anyway, compounding the error. (https://forum.concours.org/index.php?threads/slipping-clutch-oil-impact.51098/). Any advice as to parts to use , your preferences, is a gasket needed; should I get a shop manual (where, suggestions?); something else. Fortunately, good riding friend will be helping me; however he's never worked on a bike clutch; but he's quality repair.

Hey, thanks in advance.
Cecil
 
You can't beat genuine OEM parts. You might get by without a gasket, but why? You should have a service manual on hand, there are 2 or 3 different disks that have a particular order of installation and the pressure plate has to be indexed properly. I have a service manual for a Gen one available for $60 plus shipping. PM if interested.
 
You must log in or register to reply here.
Top