• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

look'n for more Torque

J

jeff413

Tricycle
Just purchased a '03 Connie & have been look'n @ possible engine / timing advances . . My question is ~~ Would a 4degree timing advance or exhaust cam sprocket be a better choice for increasing low & mid range TQ & better roll-on performance TextText
 
You might want to post this in the C10 section. The people over there may know more about it. You might get better answers! ;) Bionic Bob COG & AMA member First C14 CDA member #0220 08 C14,03 Mean Streak, & 86 C10
2638311280103513287fDmUTZ_th.jpg
 
I loved my 03. I would more than likely still have her if disaster didn't strike. Yes I have a C14. But I also went the other way and bought an 86 as a restoration project! Bionic Bob COG & AMA member First C14 CDA member #0220 08 C14,03 Mean Streak, & 86 C10
2638311280103513287fDmUTZ_th.jpg
 
I had an 05 and it didn't lack torque. Past 6000 rpm to went to hyperdrive! Always two up and loaded for long distance. Never a wanted for more. Put 137,000 miles on that thing. Ran strong till I sold it. On a C14 now. I say don't diddle with it just ride it! UP
 
You must log in or register to reply here.
Top