• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Passenger foot peg riser kit needed

I have never seen such a thing.  My guess you may have to make something up yourself.  Maybe by adding floor boards to the stock pegs will be more comfy and higher?
 
Two pieces of 2x4 and a couple of hose clamps will give you an inch and half.  :beerchug:

Then you can say they are floor boards.  :))
 
The link below shows my solution to the same issue.  My wife loves the floorboards.  They're up higher and allow her to move her feet around more.  Stock passenger pegs were too low for her, causing pressure from the seat cut on the inside of her legs.  She's ridden 11 hours in one day on these floorboards with no discomfort.

http://www.shadetreepowersports.com/cgi-bin/04570D91/mac/additmdtl.mac/showItemDetail?loadItem=70-48

No afilliation, just a happy customer.
 
Did a quick mod of a couple of small floor boards clamped to the pegs. Seems I'm on the right track. Need something that will hindge and not look so bad.
 
You must log in or register to reply here.
Top