• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Rebuilding BMW air head help

C

crisp

Training Wheels
My son is rebuilding an older air head to put into a Dneper. All is good except a special tool is needed to install the main rear seal on the engine. Just wanted to know if anyone in the Seattle area would have one I could borrow? --chris - on the trailing edge of technology
 
Chris, If he hasn't done so he might check with the Airheads forums. I used to hang around there and they were pretty active and helpful. http://www.bmwmoa.org/forum/forumdisplay.php?f=13 There are two or three forums for the airhead bikes nowadays. Good luck!
 
Thanks for the info. He is checking other places, I just thought I woud see about here. The tool is only $35 or so. If he doesn't find someone right away he will buy one. He is frugal enough for a connie so he doesn't want to buy a one time tool. :) --chris - on the trailing edge of technology
 
You must log in or register to reply here.
Top