• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Rostra C/C control pad cover

V

Viper

Member
Member
I have seen a few of the control switch housings with a silicone cover. This looks like a GREAT help to keep out water and dirt. Murph no longer has them. Any chance there is one available somewhere?
 
They're not so good as they allow rain in from the rear of the pad. In the wet I tie a small freezer bag over it.
 
On my 2005 C10, I RTV'ed the back thinking that would work, but water was getting through the front key pad .

So, on my C14, I took the key pad out and RTV'ed the front cover around the keys, put it back together and then RTV'ed the back. That worked.

Still haven't fixed my C10 yet.
 
You must log in or register to reply here.
Top