• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

SOLD

H

HOLLYWOOD33

Tricycle
I have a set of Murph's risers and wedges with all the necessary hardware...

The risers alone retail for $92.00

The Ram ball attachment retails for $30.00

The Murph's wedges retail for $68.00

That's $190.00 retail


I'm selling the lot for $100.00 shipped to the lower 48 of the USA................  :beerchug:

PM me for Paypal address... Thanks!


76f058d1.jpg

4e50fde7.jpg



This set gives 3/4" pull back and 1-3/8" rise. For comparison, we have the stock measurement from the top of the mirrors to the bars at 12-1/4", while the height of the bar end is 41-7/8" on center from the ground. With the KB risers installed, the distance back is now 13", with a height of 43-1/4". The riser blocks themselves are 1-5/8" thick.

You will not have to change or reorient any of your brake or clutch lines, or the throttle cables, with our risers. All competitive products we are aware of require some kind of rotation of brake lines or bracket flipping or some such thing. Murphs' risers are 100% PLUG AND PLAY for ALL YEARS of the C14, and that includes the 2010 and up Traction Control models!
Click to expand...
 
You must log in or register to reply here.
Top