• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Springs 1.1 or 1.2 ??? 220lbs no gear on

JS_racer

JS_racer

Street Cruiser
help guys, got screwed by race techs incorrect spring guide that has the bike a tic over 600lbs. Anyways, my guy did the gold valves and 1.0 springs, way too soft and can't get them dialed in.  :-[ they now recommend 1.2, but looking for feedback since their last recommendation on the chart was way off. (they are swapping them out)

i weigh 220 out of the shower, and i ride "the pace" semi aggressive on some 1.5 lane bumpy crappy roads in Wisconsin.  :great:

any other tips here ?? the long soft top out spring was recommended to be replaced, but with something they done have till the next production run. sweet!!

thanks much for the time,
Joel
 
I am putting in 1.2 straight rate springs when I install my AK20 cartridges in a few weeks (Came with the kit)

 
From their site, they have the bike listed too light.
Have both on order, think 1.2 might be the ticket though.
 
You must log in or register to reply here.
Top