• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

TOB w/blade style pegs.

laker9142

laker9142

Member
Member
Tip over bars. I'm shipping a set that I started 12 years ago. Had (almost) enough parts to get a set done. Since Ronnies Pegs and whoever it was that made the other tip over bars have stopped making theirs, I wanted to see if there would be any interest in another batch of these. I'd need 6 to 10 people with real interest and $750 to make it worthwhile. I've got plenty of pictures and good history if you have any interest.
 

Attachments

  • TOB12.jpg
    TOB12.jpg
    159.9 KB · Views: 60
I looked at a bike that had these on back in 2022. Didn't end up buying it. It had previously been owned by a guy that I was told was well known on this forum, named Mattchewn. They were nice looking. Screenshot_20220425-180726_Cycle Trader.jpg
 
Matt is still in COG, just not as active in the forum.Hoping to see him in Flaywoods.
Good guy, just don't tell him I said so.
 
deanbuffington909409 said:
Could you do the C-10 front tip over bars.
Click to expand...
That's not really possible. It took more than a year to finalize something I would want to sell.


hammerash said:
It had previously been owned by a guy that I was told was well known on this forum, named Mattchewn.
Click to expand...
Matt went through several sets of TOBs, on 2 different C14s. He was a good tester for function and reliability! Him and another guy destroyed 2 sets and tested 2 more. It was actually good to see the results in that they protected the bike in more than just a tip over, and had no negative effect on the mounting points.
 
They fit all years. With Gen 2 you have to drill a hole for the lower mount. As shown in the picture post 3. It's easy.
 
You must log in or register to reply here.
Top