SOLD....7th Gear Unit

[bowtie39]

Took this out of a '01. It was installed at 17360 miles and bike now shows 32375 and doing some high math that's 15K of use and that is from 2015. Tried to show the gears so able to count but that is sometimes easier said than done. But again, did the high math stuff counting teeth and will guarantee it has the 15/22 vs. 16/21 that a stock bevel has. You will need a gasket. There is just a touch of the paint chipping so if you want a show room look may have to do some refinishing. 375.00 shipped in lower 48. Thanks so much!

 

[jmmchristies]

Is this still available I would like to purchase
Thank You, Jim

 

[jmmchristies]

Took this out of a '01. It was installed at 17360 miles and bike now shows 32375 and doing some high math that's 15K of use and that is from 2015. Tried to show the gears so able to count but that is sometimes easier said than done. But again, did the high math stuff counting teeth and will guarantee it has the 15/22 vs. 16/21 that a stock bevel has. You will need a gasket. There is just a touch of the paint chipping so if you want a show room look may have to do some refinishing. 375.00 shipped in lower 48. Thanks so much!

Sorry meant to reply to you directly. If this is still available I would like to purchase.
Thank You,Jim

 

[bowtie39]

Sorry meant to reply to you directly. If this is still available I would like to purchase.
Thank You,Jim

Sent PM to you

 

[bowtie39]

SOLD PENDING

 

[Stasch]

These are relatively rare, only 150 of them were produced.

 

[Steve in sunny Fla]

Bowtie, be sure to include the shorter spring with the unit.
Steve

 

[bowtie39]

Absolutely