• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

2009 T Rex engine guards

G

gp74

Member
Member
I want to add engine and luggage guards to my 09. Unless I'm wrong, my only option is T Rex. Just wondering if any gen 1 owners here have them. If so, any opinions, and how difficult was the install. Any time you have to remove plastic it can be a pita and the directions say fairings need removal for engine guard install. Just looking for a little insight. Thanks
 
Last edited:
I have them on my 09. I don't notice them any more, been on there for 6 years. The lower mount attaches to the rear eng mount. Slide the long bolt out to the right after removing the nut on the left. Do not turn the head of that bolt, it's adjustment is critical. Do one side at a time so that the front of eng doesn't drop and make eng mount refitting problematic.
 
Freddy said:
I have them on my 09. I don't notice them any more, been on there for 6 years. The lower mount attaches to the rear eng mount. Slide the long bolt out to the right after removing the nut on the left. Do not turn the head of that bolt, it's adjustment is critical. Do one side at a time so that the front of eng doesn't drop and make eng mount refitting problematic.
Click to expand...
If I do go that route, thanks for the heads up.
 
You must log in or register to reply here.
Top