• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Big Bore Jetting

K

K_C_M

Guest
Guest
I have a gas a flowed head with Steve's torque cams installed. I am now getting the Wiseco K1039 kit installed, but do I need to re-jet the carbs and if so what size jets do I need? Anyone know, or done this before?
 
Steve, When I installed the torque cams, I kept the standard jetting in the carbs. Should I have change this or are you saying that the standard jets with the overbore and torque cams should be OK?
 
You must log in or register to reply here.
Top