• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

C14 PARTS AND ACCESSORIES

R

RICHKAWI

Member
Member
My 2015 Concours is gone and now I need to clean out the shelves in the garage. Most of these items were never mounted and many are still in their boxes.

-Stock seat base (Padding removed) $25
-Windshield rubber and plastic mounting gaskets $50
-Bestem saddlebag liners (used twice) $40
-Murphs lower pegs in black (Used two months) $75
-Murphs lower pegs in chrome (never mounted) $75
-Low fuel warning eliminator (Never used) $20
-Adv sport touring bar risers (Never used) $75
-Rear brake lever (never mounted) $50
-License plate frame (Used three years) $20
-Delkevic 18" oval CF slip on with midpipe (used one season) $150


These prices do not include shipping as the shipping costs will vary between items. I also have photos available upon request.
Thanks
Rich
 
Last edited:
RICHKAWI said:
My 2015 Concours is gone and now I need to clean out the shelves in the garage. Most of these items were never mounted and many are still in their boxes.
-Kawi C14 shop manual for '15-'17 (lightly used) $50
-Fred Harmon DVDs (Never used) $50
-Stock seat base (Padding removed) $25
-Windshield rubber and plastic mounting gaskets $50
-Bestem saddlebag liners (used twice) $40
-Windshield bracket (By COG Member Laker9142) (Never monted) $100
-Aero Shields (never mounted) 30.00
-EBC Brake pads (New) 1 @ FA254HH + 2 @ FA417/4HH $70
-Murphs speed bleeder (Never used) $30
-Buell Pegs (Never used) $25
-Madstad brackets (Never mounted) $125
-Murphs lower pegs in black (Used two months) $75
-Murphs lower pegs in chrome (never monted) $75
-Saddlebag wire locks (never used) $10
-Low fuel eliminator (Never used) $20
-KiPass switch bypass (Never used) $20
-Adv sport touring bar risers (Never used) $75
-Radiator guard (Used three years) $40
-T-Rex trail tie down system (Never used) $70
-Fiberglass rear tire hugger (Never mounted) $50
-Rear brake lever (never mounted) $50
-Phills rack to work with Kawi top box (Never mounted) $60
-Copper Dawg shield (used parts of five summers) $250
-License plate frame (Used three years) $20
-Delkevic 18" oval CF slip on with midpipe (used one season) $150
-Switchback lights (never installed) $100

These prices do not include shipping as the shipping costs will vary between items. I also have photos available upon request.
Thanks
Rich
Click to expand...
Pm sent
 
Wow! I didn't expect so much interest so soon. I need to sort it all out later today (and tomorrow) and see what the shipping costs are going to be.

I'll get back to everyone as soon as possible.

Rich
 
RICHKAWI said:
Wow! I didn't expect so much interest so soon. I need to sort it all out later today (and tomorrow) and see what the shipping costs are going to be.

I'll get back to everyone as soon as possible.

Rich
Click to expand...
The early bird gets the worm.šŸ˜‰
 
RICHKAWI said:
My 2015 Concours is gone and now I need to clean out the shelves in the garage. Most of these items were never mounted and many are still in their boxes.
-Kawi C14 shop manual for '15-'17 (lightly used) $50 -SOLD
-Fred Harmon DVDs (Never used) $50 -SOLD
-Stock seat base (Padding removed) $25
-Windshield rubber and plastic mounting gaskets $50
-Bestem saddlebag liners (used twice) $40
-Windshield bracket (By COG Member Laker9142) (Never monted) $100 -SOLD
-Aero Shields (never mounted) 30.00 -SOLD
-EBC Brake pads (New) 1 @ FA254HH + 2 @ FA417/4HH $70 -SOLD
-Murphs speed bleeder (Never used) $30 -SOLD
-Buell Pegs (Never used) $25 -SOLD
-Madstad brackets (Never mounted) $125
-Murphs lower pegs in black (Used two months) $75
-Murphs lower pegs in chrome (never monted) $75
-Saddlebag wire locks (never used) $10
-Low fuel eliminator (Never used) $20
-KiPass switch bypass (Never used) $20 -SOLD
-Adv sport touring bar risers (Never used) $75
-Radiator guard (Used three years) $40 -SOLD
-T-Rex trail tie down system (Never used) $70 -SOLD
-Fiberglass rear tire hugger (Never mounted) $50 -SOLD
-Rear brake lever (never mounted) $50
-Phills rack to work with Kawi top box (Never mounted) $60
-Copper Dawg shield (used parts of five summers) $250
-License plate frame (Used three years) $20
-Delkevic 18" oval CF slip on with midpipe (used one witch season) $150
-Switchback lights (never installed) $100 -SOLD

These prices do not include shipping as the shipping costs will vary between items. I also have photos available upon request.
Thanks
Rich
Click to expand...
Hello where could I get a switch bypass . It would be cheaper than Carmo. Thanks
 
Jakester said:
Hello where could I get a switch bypass . It would be cheaper than Carmo. Thanks
Click to expand...
I don't think you understand what's going on there. The switch bypass only bypasses a stuck switch in the headstock Stove Knob key assembly. It does not mean that you'll be able to start the bike without the properly programmed active FOB or passive RFD chip.

You could probably make your own from the info (photo inspection) that Brian put in the the install instructions. Brian chose to have a fuse that is pulled and then reinserted to activate the display, but a normally closed momentary switch could be used as well. Info is available in COG Tech Library.
 
Last edited:
Bud said:
How much is Carmo?
Click to expand...
https://www.carmousa.com/index.php?main_page=index&cPath=4102_4105

About $270 gets you a working passive chip which will unlock things enough to take the bike to a dealer to get an active fob programed.

Carmo Electronics said:
We program a transponder for you. Transponder must be placed on a nok in front of the ignition switch to start the bike.
Original handsfree Kawasaki FOB key can be programmed by the Kawasaki diagnostic tool.


For this service you have to ship several parts to Carmo electronics:
- KIPASS unit of your motorcycle (see the picture beneath).
- Box by the ignition switch (see the picture beneath).
- Copy of the original purchase papers of your motorcycle.
- Copy of identification / driving license.


The Kawasaki FOB key is not included
Click to expand...
 
Last edited:
fartymarty said:
https://www.carmousa.com/index.php?main_page=index&cPath=4102_4105

About $270 gets you a working passive chip which will unlock things enough to take the bike to a dealer to get an active fob programed.
Click to expand...
I'm in my second season of riding after Carmo got me going again. My original fob's burnt up in a car fire. I tried using a kipass unit and fob from another bike with no luck and it was a nightmare. Carmo had me up and running in no time after the bike sat for 2 years. Personally IMHO Carmo saved my bike as I was one step away from giving up on it.
 
Still have the Phil's rack and the Trex guards? Let me know if I could get pics without too much of a hassle. I'm assuming the Phils has the SW Motec hardware installed? And is the Trex stuff all black including the replaceable sliders? Was thinking about buying this stuff anyways so if it's what I'm looking for might as well help you get rid of it. Thanks!
 
You must log in or register to reply here.
Top