Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.
My shock had 108 thousand on it when I replaced it with an Ohlins, probably not worth anything. I would like ten dollars plus shipping.
The picture of the hose came out a little blurry, I can try again if you want.
Just wondering; when you replace the hose will you worry about hydraulic fluid? I assume we will need to put the preload to full soft to avoid losing fluid when we remove the hose. Or can you find info for replacing fluid?
Also you asked: "when you replace the hose will you worry about hydraulic fluid? I assume we will need to put the preload to full soft to avoid losing fluid when we remove the hose. Or can you find info for replacing fluid?"
Short answer: The actuator/adjuster is a separate oil circuit from shock. It is not pressurized. You are correct about preload to full soft in procedure. Fred Harmon has instructions on Tech page on how to do this.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.