• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

carbs from 2002 fit 1987

K

kevin

Training Wheels
working on my 1987 runs poor when starting wont rev back fires till warmed up then runs great looking at 2002 carbs will they fit 1987 if that is the problem any other suggestions thanks kevin
 
Kevin, I believe the carbs are the same for all Connies. A Carb Guru will be along in a bit to confirm. '02 Connie COG # 6662 Dallas, Tx
 
kevin, it sounds like yours just need a good cleaning. maybe some trash in the starter circuit. I think the 02 ones will fit but not sure.
 
The Carb rack on the C10 is the same across all years. I agree with the other post, you're better to pull the rack, and service the carbs. Take a look at Steve In Sunny Florida's Jet kit http://shoodabenengineering.com/ and Rich's carb service article in the Fall O6 Concourier. Do both of those and all will be well. I would suggest you buy a new set of carb boots, and perhaps the carb needles. The boots get real stiff after 20 years and new ones make installation much much easier. Colin Colin Prior COG IT Director Lake Forest Park WA COG#7767 AMA#1081764 ROK#20000617
2606714340100596652OGFlOW_th.jpg
 
You must log in or register to reply here.
Top