Doug_Wood_IL
Bicycle
I finally got the throttle cable and wire loop installed, but now have another issue when I "bench tested" the cruise control. What I did was I started the bike and with it on the center stand, I turned the cruise on. I then took the engine up to about 3500 rpm and set the cruise. What the cruise control did was try to engage, or maybe I should say the cruise very quickly kicked on, pulled the rpm's up to about 4000 and then disengaged. All this happened in a second or two at the most. My interpreatation is the cruise pulled the throttle too quickly, and the increase in revs caused it to disengage? I'm wondering aslo if this is just being caused by the bike being in nuetral without a load on the drivetrain, and is normal? If I don't hear from anyone, I guess I can take it for a test ride and see what happens. Thanks for any info or thoughts! Doug