• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Driver right side footpeg mount

roryred

roryred

Guest
Guest
IT looks like my bike has had some unclaimed and unrepaired CDA activity... and I'm replacing the right side footpeg bracket. I have the new one and it looks like just two bolts and the rear brake cable. Straightforward replacement? I hope I can reach the back of this bracket to remove the bolts without having to remove too much other stuff. I'll let you know.
 
Hello, it's a pretty streiaight forward replacement. It's 4 bolts total. The 2 that you see, and there are 2 that are installed from the backside. you will see them after you remove the two visible bolts. Also make a mental note on the location of the 2 springs. Total time 10 min.
 
Not that this is going to help, but the left front is easier, only two bolts and the whole assembly comes off in your hand. I just had to do this when the hinge cracked. I didn't lose the peg, but I started to carry an 8mm x 110mm bolt in my saddle bag just in case, while I waited for my parts to come in. It was pretty easy. Scott
 

Attachments

  • Kawasaki.jpg
    Kawasaki.jpg
    592.5 KB · Views: 44
You must log in or register to reply here.
Top