Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.
I recently changed the final drive oil and used pliers and a half dollar to get the filler cap off. Is there a better tool I can use? Please help!
Wreckin Ball
My local auto-zone sells a spark plug gap tool made of somehting that resembles soft brass. It happens to fit the cap perfectly. It fits tight, so no cap damage. I could not find a half dollar and five dimes did not help at all.
Murph's sells machined aluminum filler caps. I got 2: the same cap fits the crankcase oil fill and the rear drive. They come with a little pin-wrench. Nice!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.