Was cleaning the bike and noticed a gap near one of the places that connects the final drive shaft of the left side of the bike. Is this gap supposed to be there? On the right side, there is no gap. The bike was dropped by the previous owner, but he paid to get it fixed at the dealer. The dealer missed a couple parts and I am wondering if the dealer missed this too.
-
WOULD YOU LIKE TO BE ABLE TO POST? REGISTER FOR COG MEMBERSHIP
All registration must be done through the club's main webpage: To register / join COG, click here
For instructions to convert to full membership, click here
-
Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
Final drive shaft question
- Thread starter cockraml
- Start date
I believe that it is normal for a gap to show in that location. My bike shows a gap there as well. If you are concerned about it, remove the black plastic cover and you should find a large nut and it should be torqued to 72 ft/lbs. The manual says to replace it anytime it is removed.