• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

front shock pressure

snarf

snarf

Member
Member
I have never had to adjust the pressure before (other bike is an 02).  What pressure is everyone running on early model bikes?
 
keep us updated.  I made a 100 mile ride two up and then checked the rear shock pressure (after dragging the center stand a bit. ???)  It had 12psi.  20-25 seems good for one up, i'm at 40 for two up (50psi max i think)

:motonoises:
 
Chris,

7 psi max on those old forks.... :-X

call Jimmie and ask him if he swapped out the springs, I believe he did, and installed progressives from Murph, if so, you don't need air.....
 
You must log in or register to reply here.
Top