• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

FS: Murphs' Lowering Pegs

S

steve poff

Tricycle
A pair of Murphs' lowering pegs for the C14 in like-new condition.  $69 plus shipping.
 

Attachments

  • 1100GS 008.JPG
    1100GS 008.JPG
    156.3 KB · Views: 107
MileMuncher said:
http://www.murphskits.com/catalog/product_info.php?cPath=130_133&products_id=401

About an 1 1/2. I just got some. Too bad I didn't check here first. I love em. But adjustments can be tedious.
Click to expand...

Shifter adjustment is trivial, but you have to follow Murph's directions on modifying the brake piston rod for the foot brake, or you'll never get the pedal low enough. I have a die grinder so it was easy to grind the rod down, but you could do it with a Dremel and an abrasive disk, or even cut it which would work too. Be sure to follow directions about running nuts up so you can run them down and dress the threads where you ground/cut it off. I took the threads on the flat part of the rod down almost all the way.
 
You must log in or register to reply here.
Top