I was thinking there were 2 up there. Thats what I am thining for the two top front ones. After looking I guess that one is not really hiding under the hinge. Close though. 2003 Concours, 56K COG #6953 IBA 28004 http://home.comcast.net/~slybones/Concours/connieMain.htmI am thinking there is one up under the hinge for the pocket door. Not sure though.
There are three screws under the pocket cover. One in the bottom of the pocket, one at the upper outside corner, and one more under the hinge. If all three screws are removed, you may be fighting the alignment peg on the bottom of the pocket. Put your fingers under the pocket and gently lift after you know all the screws are out. This should free the peg from the hole.Posts: 7 Joined: 09/27/2009 I have tried to removed the side pocket/inner panel but it is stuck st the top. Is there a screw hidden somewhere, I have removed the screw inside the pocket but ????????thanks
Gloves can cause the same problem if there is anything on them. What happens is contaminants like finger oils (or anything else that sticks to the bulb) burn and create hot spots, which create failures due to heat. I always try to use the packaging the bulb came in if I have to handle the glass portion of the bulb.One question, everyone has been very clear about don't touch the bulb. Any problem with wearing nitrile or latex gloves? I would think this would prevent any accidental contact in tight quarters. Just curious.