• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

My dyno chart from 7-2010

COGnosticator

COGnosticator

Guest
Guest
Kinda slow to getting this posted  ;D

medium.jpg


What y'all think

I know, you can't read it so here is the link to it

http://www.pbase.com/cognosticator/image/136327178/large
 
Is this a totally stock bike? What year model and how many miles were on it at the time of the run?
 
Fred_Harmon_TX said:
Is this a totally stock bike? What year model and how many miles were on it at the time of the run?
Click to expand...

2009 flies out, bmc air filter, muzzy slip on, PCv with the map from fuel moto.  About 8k miles on the bike at the time.  I took it to KWS to see if they could improve the map from Jamie.  He said there wasn't much he could do to the map.  That was the economy map, I forgot to flip the switch to go to the performance map Jamie sent me.  Not sure how much difference that would have made.
 
Correction Factor.  It is used to normalize to standard conditions.  Key ingredient to accurate numbers.  CF is not A/F Ratio.
 
The run was done in SAE mode (it shows on the side of the chart) which in my opinion is pretty good horsepower. If this was the economy map I would like to see what it does with the performance map.
 
COGnosticat0r said:
Fred_Harmon_TX said:
What gear was this chart made from?
Click to expand...

Does this answer your question:

http://www.kwsmotorsports.com/dynotuning.htm
Click to expand...

No it doesn't. I was wondering what gear the bike was in on the dyno for the chart you posted. 3rd gear? 4th gear? 5th gear?
 
Fred_Harmon_TX said:
COGnosticat0r said:
Fred_Harmon_TX said:
What gear was this chart made from?
Click to expand...

Does this answer your question:

http://www.kwsmotorsports.com/dynotuning.htm
Click to expand...
No it doesn't. I was wondering what gear the bike was in on the dyno for the chart you posted. 3rd gear? 4th gear? 5th gear?
Click to expand...

Duh, show you how much I know about this.  I remember him running through the gears and with just a wild guess I would say 5th, but I really don't know
 
You must log in or register to reply here.
Top