• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

rear spline

G

gslothower

Training Wheels
A few weeks ago, someone had posted a article about cleaning and greasing the rear spline,now as Im ready to do the work, I dont remember who it was. I would like to find the article so I dont mess anything up. Thanks
 
As for removing and reinstalling the rear drive housing, so you can get to the splines I just follow the manual. Seems like the instructions were ok As for grease I used a molybdenum grease in a tube. Lightly coat the splines with a small auto parts brush. Back last summer when my rear drive started leaking, I took it to stealer to have it rebuilt, since it was leaking from the center and an inner seal and not the big outer one. I did not want to take it all apart myself. Anyways when I picked it up they gave me grease in a small dish and a brush for reassy. 2003 Concours, 56K COG #6953 IBA 28004 http://home.comcast.net/~slybones/Concours/connieMain.htm
avatar_lg.jpg
VisitedStatesMap.jpg
VisitedProvincesMap.jpg
 
You must log in or register to reply here.
Top