• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Ride Side Tip Over Bar

Wess

Wess

Member
Member
Not that I laid my bike over and bent the old one or anything :blush: . I just thought it would make a great christmas stocking stuffer. Respectfully Yours! Wess Heavner COG #8010 CDA #0239
2956721740102653285S200x200Q85.jpg
 
Wes, are you looking for a bar or selling one? I folded mine flat a couple of weeks ago. The bar itself didn't bend, but the brackets bent. We straightened them out most of the way on the ride by having 1 guy hold the bike and 2 pulling on the bar. When I took the undamaged plastic off to do a valve adjust, I put a 3/8" X 8" extension in the bolt hole and prying on the top 1 until it was square again. Hint, when reinstalling the plastic, put the bolts in the brackets first. I did call Murph about replacements, He said they were under construction and 2 check back in a couple of weeks. COG # 8062 AMA # 1084053 ROMA or Scarlet harlot acording to my wife
 
You must log in or register to reply here.
Top