$$ SOLD. $$
Up for sale, my 2006 Concours with a little over 49,000 miles. $1800. I bought the bike Oct. 2017 with 42K miles.
I have since done the following:
-Had carbs rebuilt by Shoodabeen, overflow tubes installed, and rejetted for 2 minute mod.
-Replaced both camshafts (some pitting) with a set from Steve with no pitting.
-New Performance Exhaust sprocket & retimed intake sprocket
-New Spark plugs
-Rebuilt petcock
-Replaced front wheel bearings
-All new radiator hoses
-New thermostat and o-ring
-New water pump pump seal and o-ring
-New o-rings on rear coolant log
-Free power mod
-New EBC rotors, front & rear (@ 46,000 miles)
-New EBC brake pads, front & rear
-Avon rear tire has just over 1600 miles
-Brand new Avon front tire
Things I have added:
-Manual cam chain tensioner
-45 degree metal valve stems
-Murphs bar risers
-Murphs Knee Savers (lowered pegs)
-Murphs headlight wiring harness
-Headlight cover
-Volmeter/charging port in left glove box
-Aluminum glove box knobs (deletes key locks/still have the original locks)
-Murphs block off plates
-Murphs complete black screw kit and Side cover knobs
-Battery maintainer pigtail
-K&N air filter
-KB fork brace w/tube protectors
-Ruddbow tailbrights and "KMW" stickers
-Murphs Top case rails
-Shad 46L top case w/ mounting plate and backrest
-Factory tank bra
Also with the bike:
-Murphs Valve Adjust tool
-Fairing extenders
-Antler covers
-Clymer and Factory service manuals
-Stock seat, rebuilt and recovered by previous owner
-Corbin seat w/ removable backrest (all leather)
- Russell Day Long seat, dual/rider and passenger
-Gustafsson tinted sport shield
-17.5" tall tinted shield, w/ Vetter pop out vents
-21" tall clear Cee Bailey shield that I cut down from a 26"
-25" tall clear 7Jurock shield
-26" tall lightly tinted Cee Bailey shield
Message me or text two five 2 6 seven eight thirty thirty for pics, as I have a hard time posting them here.
Up for sale, my 2006 Concours with a little over 49,000 miles. $1800. I bought the bike Oct. 2017 with 42K miles.
I have since done the following:
-Had carbs rebuilt by Shoodabeen, overflow tubes installed, and rejetted for 2 minute mod.
-Replaced both camshafts (some pitting) with a set from Steve with no pitting.
-New Performance Exhaust sprocket & retimed intake sprocket
-New Spark plugs
-Rebuilt petcock
-Replaced front wheel bearings
-All new radiator hoses
-New thermostat and o-ring
-New water pump pump seal and o-ring
-New o-rings on rear coolant log
-Free power mod
-New EBC rotors, front & rear (@ 46,000 miles)
-New EBC brake pads, front & rear
-Avon rear tire has just over 1600 miles
-Brand new Avon front tire
Things I have added:
-Manual cam chain tensioner
-45 degree metal valve stems
-Murphs bar risers
-Murphs Knee Savers (lowered pegs)
-Murphs headlight wiring harness
-Headlight cover
-Volmeter/charging port in left glove box
-Aluminum glove box knobs (deletes key locks/still have the original locks)
-Murphs block off plates
-Murphs complete black screw kit and Side cover knobs
-Battery maintainer pigtail
-K&N air filter
-KB fork brace w/tube protectors
-Ruddbow tailbrights and "KMW" stickers
-Murphs Top case rails
-Shad 46L top case w/ mounting plate and backrest
-Factory tank bra
Also with the bike:
-Murphs Valve Adjust tool
-Fairing extenders
-Antler covers
-Clymer and Factory service manuals
-Stock seat, rebuilt and recovered by previous owner
-Corbin seat w/ removable backrest (all leather)
- Russell Day Long seat, dual/rider and passenger
-Gustafsson tinted sport shield
-17.5" tall tinted shield, w/ Vetter pop out vents
-21" tall clear Cee Bailey shield that I cut down from a 26"
-25" tall clear 7Jurock shield
-26" tall lightly tinted Cee Bailey shield
Message me or text two five 2 6 seven eight thirty thirty for pics, as I have a hard time posting them here.