• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Stebel Nautilus install pics .

Cra-z1000

Cra-z1000

Member
Member
Installed my stebel nautilus . Went well and used Murphs harness . After blowing the horn 3 or 4 times the inline 10 amp fuse will blow . Searching online it seems most people up that fuse to 15 amp to resolve this issue . Sound right to you guys ? I also wondered if the horn is grounded through the mount. I used a plastic spacer on the install which would interuppt the ground if so and can replace in if nessacary. Thanks in advance !
 
The  air pump has its own ground wire and that is all that is required. My fuse happens to be a 20amp but it runs the stebel  horn and driving lights. Your good to go.
 
Thanks man . Wonder why the harness comes with a 10 amp fuse ? Sounds like a lot of people had this issue .
 
I though a Stebil Nautilus sucked 18A when it was played. The Stebil HF80 models are 4.5A each for 9A total. But the Nautilus was twice that.
 
Ill try to post some up . I always have that sizing issue with photos. I removed my fairing pocket on the left side and used the mounting hole for the bottom of the pocket to mount the horn . It only fits one way but it was the right way as far as having the opening down . The harness worked great where it is....plug and play . Just followed Murphs instructions to hook up .I did have to take loose the gauge cluster to disconnect the

stockers and gettt at the connections
 
I did have to sacrifice the pocket on the left side but my 87 has the vinyl button cover over that pocket and I didn't use it much anyway . The cover buttoned right back on so its invisible .
 
Finally getting some pics up of my install. I'm pretty happy with it .As I said I did lose the left pocket but with the cover back on I can still hang my shades there so its all good .
 

Attachments

  • -3288297108912956084.jpg
    -3288297108912956084.jpg
    120.9 KB · Views: 224
  • 6620781881620243695.jpg
    6620781881620243695.jpg
    115.7 KB · Views: 207
  • -2060041629954831490.jpg
    -2060041629954831490.jpg
    118.8 KB · Views: 179
  • 1288890736730066249.jpg
    1288890736730066249.jpg
    106.2 KB · Views: 195
Couple more .
 

Attachments

  • -7943992435467665354.jpg
    -7943992435467665354.jpg
    100.5 KB · Views: 173
  • -3858241048621973529.jpg
    -3858241048621973529.jpg
    117.9 KB · Views: 177
You must log in or register to reply here.
Top