I've got a standard digital tire gauge that isn't reading any pressure on the rear suspension or up on the front forks. I tried to put some air in with a bike pump but its incredibly difficult leading me to believe there is a decent amount of air pressure in the shock. After trying to push some more air in I do get a reading from the digital but its low only around 11psi on the rear and it shows 10 on the front. This doesn't make sense to me since its so hard to push any air in at all with the bike pump. Am I doing this completely wrong? The bike seems to ride ok but then again I'm completely new to it so I've got no comparison. Also pushing in the valve doesn't release any air. This things basically kicking my tail right now over something so simple. Not sure how important it is but I'm 6ft around 245lbs and I ride with another 15 lbs or so in the bags and strapped behind me. Mostly between legal highway speeds and 100mph depending on how I'm feeling that day. Also the dampener is set at 2