Looking for ideas for a simple fuse block that i can install to add a few accessories. Right I'm thinking heated grips, heated vest and gps. Let's hear what you got.
Nice. I like the price and clean look. Is the max 15 amps per fuse?Centech ap-2... about $50. Has constant and switched power. Runs my gps, auxiliary led lighting, rostra cruise control, secondary powered outlet mounted on left side of dash in the dead spot next to headlight adjuster.
Great! Thanks for the info.Im having difficulty cutting and pasting the specs and description from amazon. But its split into 2 sections. 1 at 40amps that have 3 fuses and 5 total output slots. And the other at 20 amps with 2 fuses and 3 output slots.... so in theory u could have 2 15 amp fuses and a 10amp in the 40 amp section ...i think thats the switched side. The contast power is the 20amp side..
Thanks. I've updated it recently. The fuse block is in the same place but I've re-run the wires and changed some accessories. I'm about to throw the bike up on the lift to go through my brakes so I'll rip the cover off and take a new pic. I drilled holes and purchased rubber grommets to run the wires through so its waterproof and won't rub the insulation off of the wiring. The relay that runs the block is on the right side of the bike under the right side upper and the wires run directly to the battery. Make sure you use heavier gauge wire (I think I used 14g) from the battery to the relay and then to the block for both positive and negative wires.Nice set-up Bigbaldy...Thank you