Amotek said:Yeppir, The tail light lights up fine! There are two plugs behind the seat, one to the license plate light and one to the tail light, which has three wires, red, blue and black with yellow stripe. Pretty strange that neithe brake switch works and/or that both bulbs are fubared, though they look fine. Think I'll run into town and grab a couple of 2357s to replace the 1157s.
6 Riders said:An easy way to tell if it's on, if you're standing at the front of the bike and can tell that the light is on, then your brake lights are active. I would say that, unless you adjusted the rear switch after adjusting the pedal, your B.L.s are on. Try unplugging the rear switch and then see if the front brake activates the light. Shouldn't take more than 5 minutes to check it this way (including removing the side panel).