OK - so - I'm really liking the new (to me) ride, but - the brakes are lacking. The PO installed a full set of Speigler lines, so the lever is nice and firm, but, it really takes some effort to pull the connie down from speed.
Looking around the various forums, I've seen where several times in the past, adapter brackets have been manufactured to upgrade the calipers to 4 pots. Unfortunately, it doesn't appear that there has been any activity with this lately.
Upgrading the full front end to post'94 (or ideally a zrx) is beyond the budget for this season.
Anyone have any leads on the desired adapters? I've found the drawings on the aussie forum, but, machining is a bit beyond my home garage skills at this time.
Thanks everyone for all the great info on the board!
Mark
Looking around the various forums, I've seen where several times in the past, adapter brackets have been manufactured to upgrade the calipers to 4 pots. Unfortunately, it doesn't appear that there has been any activity with this lately.
Upgrading the full front end to post'94 (or ideally a zrx) is beyond the budget for this season.
Anyone have any leads on the desired adapters? I've found the drawings on the aussie forum, but, machining is a bit beyond my home garage skills at this time.
Thanks everyone for all the great info on the board!
Mark