• FORUM NAME - If you are a COG Member and your user name does not match your name in the old forum or you just want a new one, you can now change it on your own. Read the Details Here

  • If you are a current COG Member or Forum Subscriber and this is your first visit to our new site and forum, please go to www.concour.org and follow the instructions at the top of the page to activate your account and gain access to your site and forum.
  • Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

US Capitol Region Tech Day [MD] - Sun, May 3, 2020


mattchewn has again graciously allowed the use of his shop for a COG Tech Day.

He has a fully equipped shop with a welder and plasma cutter. He have a KDS 3 here as well if you need to do some FOB or TPMS programming. He will have a new No-Mar changer installed before the tech day also if you want to mount and balance your own tires.

You can arrive as early as 8am. Lunch will be served around noon.

Please RSVP to Bamm Bamm (ebonyzg1400@gmail.com) by Saturday, May 2, 2020, to reserve your spot. We also would like to get a head count of how many mouths to feed. Even if you're not wrenching on your bike, swing by and meet up with fellow COG members.

There is a Cycle Gear about ten miles away in case you want you need to get some oil or other parts to service your bike. There is also an Advance Auto Parts about two miles away.

RSVP/Event Link: http://www.cog-online.org/clubportal/EventDetailPublic2.cfm?clubID=1328&EventID=260056