Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.
I had ZX14 forks on my 08 and 09 (Not sure if it was an R). The ZX forks are about 6 mm longer tan ZG forks. This required me to fit bar riser spacers so the risers would clear the top of the forks since I did not want my front end raised 6 mm.
I'm not sure of any differences between them (ZX14/ZX14R), but you probably should be able to get on Ohlin's website to see if there's a part number difference for them. There might even be measurements for them as well.
Some of the later year models of the ZX14 had ABS as an option..... just saying, but you need to be aware that the mounting method for the ABS Sensor was different, as it had a different ABS Sensor than the C14 at one time. I know this, as I ran into and resolved it when I installed Ohlins ZX14 Forks on my 2011 C14.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.